Pro/Forums - View Single Post

krazy · 05-30-2004, 01:40 PM

The turbulator part is mechanically expanded (according to their site) once placed within the tubing, so it will not come out at all.

Usually, they do this by sending an oversized ball bearing through that center channel with compressed air.

The design looks like it's not a good solution for low pressure low flow operations like PC watercooling.

05-30-2004, 01:40 PM	#9
krazy Cooling Savant Join Date: Mar 2003 Location: St. Paul, Minnesota, USA Posts: 123	The turbulator part is mechanically expanded (according to their site) once placed within the tubing, so it will not come out at all. Usually, they do this by sending an oversized ball bearing through that center channel with compressed air. The design looks like it's not a good solution for low pressure low flow operations like PC watercooling. __________________ Abit NF7-S ... xp1800+ ... Abit GF4ti4200 ... Maxtor 120gb SATA150 Currently gathering parts to water cool everything! (read about the project)