Pro/Forums - View Single Post

krazy · 05-30-2004, 01:51 PM

A drill press won't get you very good blocks either. You're seriously best off just buying some good prefab blocks unless you really want to invest probably thousands of dollars on equipment to make what someone else already designed and tested that can be had for $50.

I don't want to deter you from trying it if that's really what you want to do, but just be informed that you will most certainly not be saving any money by making the blocks yourself.

05-30-2004, 01:51 PM	#6
krazy Cooling Savant Join Date: Mar 2003 Location: St. Paul, Minnesota, USA Posts: 123	A drill press won't get you very good blocks either. You're seriously best off just buying some good prefab blocks unless you really want to invest probably thousands of dollars on equipment to make what someone else already designed and tested that can be had for $50. I don't want to deter you from trying it if that's really what you want to do, but just be informed that you will most certainly not be saving any money by making the blocks yourself. __________________ Abit NF7-S ... xp1800+ ... Abit GF4ti4200 ... Maxtor 120gb SATA150 Currently gathering parts to water cool everything! (read about the project)