Pro/Forums - View Single Post

Titan151 · 06-11-2004, 01:05 AM

13 Degrees C. At 200 x 12. Uses much less power. I also lapped my maze 4 and did a much better job with the mounting setup. I have an aquarium chiller and with my original XP 2500 it was always in the 20's. I still plan on making my own from an AC unit. I also put the heat sink on the mosfets like you mentioned. Next up I will start tinkering with the FSB. My question is this. Won't the FSB be the same regardless of the chip I use. That said if I can suddenly go higher is it safe to assume that this was do primarily to the heatskink on the mosdets? just for future ref. Assuming all other factors other then the chip are the same.

I am stoked!

oh vcore at 1.7 still need to tinker with it. I just put it there for now.

edit. Now I am stable at 206 x12.5 more testing to go.Just surpassed my best 3d mark 2001 rating. Up to 18,600 with no vid card OC. That doesn't meen much just yet but is a nice benifit. Before, any alteration of the fsb caused it to lock up. I think that sink is working. It is still hot on the top left corner of the sink. I may try riggin up a small fan in that area near the NB and see if that helps. Thanks for all the help guys!! As discussed I couldn't go above 12.5. But hey I can worry about that later. If I get that FSB up then I won't need it anyway. When I ran the multi of 13 it came up as a multi of 5 in CPUID.

I like this chip. You know how you can simply feel when your system is faster. That is how this is. Word to the mobiles.

06-11-2004, 01:05 AM	#24
Titan151 Cooling Savant Join Date: Apr 2004 Location: Seattle Posts: 116	13 Degrees C. At 200 x 12. Uses much less power. I also lapped my maze 4 and did a much better job with the mounting setup. I have an aquarium chiller and with my original XP 2500 it was always in the 20's. I still plan on making my own from an AC unit. I also put the heat sink on the mosfets like you mentioned. Next up I will start tinkering with the FSB. My question is this. Won't the FSB be the same regardless of the chip I use. That said if I can suddenly go higher is it safe to assume that this was do primarily to the heatskink on the mosdets? just for future ref. Assuming all other factors other then the chip are the same. I am stoked! oh vcore at 1.7 still need to tinker with it. I just put it there for now. edit. Now I am stable at 206 x12.5 more testing to go.Just surpassed my best 3d mark 2001 rating. Up to 18,600 with no vid card OC. That doesn't meen much just yet but is a nice benifit. Before, any alteration of the fsb caused it to lock up. I think that sink is working. It is still hot on the top left corner of the sink. I may try riggin up a small fan in that area near the NB and see if that helps. Thanks for all the help guys!! As discussed I couldn't go above 12.5. But hey I can worry about that later. If I get that FSB up then I won't need it anyway. When I ran the multi of 13 it came up as a multi of 5 in CPUID. I like this chip. You know how you can simply feel when your system is faster. That is how this is. Word to the mobiles. Last edited by Titan151; 06-11-2004 at 01:51 AM.