View Single Post
Unread 06-18-2004, 06:10 AM   #1
Cptn. Foo Foo
Cooling Neophyte
 
Cptn. Foo Foo's Avatar
 
Join Date: Nov 2002
Location: Calgary, Alberta, Canada
Posts: 95
Question about DVI-D and DVI-I

Hey...wondering if anyone can contribute their $0.02 on this.


- I have a friend with a nice Sony widescreen TV and it has a DVI-D input connector at the back
- we have a GF4 video card with a DVI-I connector at the back
- we have located a DVI-D 10 foot cable at Futureshop
- we are wondering if we can hook up the TV to the card using the DVI-D cable


The reason we aren't sure if this is possible is because of these pictures of DVI connectors we found on the internet...


DVI-I socket (this is what is on the video card)



DVI-D socket (this is what is on the TV)



Another picture showing more differences (we understand the single/dual link part of DVI)



You will notice in the 2nd picture the DVI-D connector has openings for two vertical flat pins to the left of the common flat pin. But in the 3rd picture the DVI-D connector doesn't have these two vertical flat pins. And the DVI-I connector does not even have openings for these 2 vertical flat pins.

We cannot remember if the 10 foot cable we found has these two vertical flat pins or not. We will go back and check sometime tomorrow probably. But if the cable does have them we are wondering if we could just use some needle-nose pliers and break them off at one end of the cable (the end going into the video card). But of course we don't want to try that if it wouldnt matter. The cable is expensive naturally.


Anyone have any words of wisdom here? Thx in advance
Cptn. Foo Foo is offline   Reply With Quote