Pro/Forums - View Single Post

bobkoure · 06-20-2004, 08:09 PM

You can also buy a Coolingworks shroud to mount a 120mm fan on a ~6x6 heater core. I've had good luck fitting this shroud to the heater core for a '71 Mercury Marquis. If you go the heater core route, remember that the dimensions are the finned area and do not include the tanks at top or bottom - and the thickness doesn't include how far the inlet/outlet protrude (but you probably guessed that last part already).

06-20-2004, 08:09 PM	#6
bobkoure Cooling Savant Join Date: Feb 2003 Location: USA - Boston area Posts: 798	You can also buy a Coolingworks shroud to mount a 120mm fan on a ~6x6 heater core. I've had good luck fitting this shroud to the heater core for a '71 Mercury Marquis. If you go the heater core route, remember that the dimensions are the finned area and do not include the tanks at top or bottom - and the thickness doesn't include how far the inlet/outlet protrude (but you probably guessed that last part already). Last edited by bobkoure; 06-20-2004 at 08:22 PM. Reason: Got the joke - nevermind...