Quote:
|
Originally Posted by Puzzdre
Strange thing you got there,
I had no POST when my CPU or NB waterblock was tighten too much so the mobo was bent, but worked when I loosen the nuts a bit.
Only thing that comes to my mind is to try to flash BIOS (no matter the same or newer version), and you didn't state the wattage of the PSU, but I reckon that you have at least 400 W, but for all that you have in there, I would try 500W, and try different manufacturer.
just my .02
Cheers!
|
I'm using a tuned
Fortron FSP capable of giving 450W
Anyway, does not matter what I disconnect...
Pure Mobo, CPU, Memory and GPU gives me the same problem.
Removing the GPU and/or memory makes no difference.
Same issue there.
I think it's strange that this would course my problems......
Over tightning... that could be it.. I use the Whitewater, with springs, and I have a backplate to prevent toe mobo from bending...
Still strange..
When I use a stock CPU cooler from Intel, it works for a short while... after this, one worm or cold reboot, and my problems begin....
