i have a chieftec matrix full tower case with the fan/shroud/rad/shroud/fan mounted to the roof of the case, a little rearward of center. i'd say i have 7.5"x6.5"x6.0" to play with at the moment. this was my first wc attempt so i placed things the best i could so that i could remove most any component without having to drain and remove the wc setup. here's a pic, hopefully, that may help...
__________________
"You can get much further with a kind word and a gun than you can with a kind word alone." - Al Capone
Last edited by Jason_The_Angry; 07-21-2004 at 09:22 PM.
|