Pro/Forums - View Single Post

BalefireX · 07-27-2004, 05:55 AM

Lizard - thanks for coming and talking to us (in a civil manner too - maybe paper journalists ARE more respectable than web ones)

One thing that stuck out in your explanation was that you did three tests of the Swiftech System, and averaged the results. Were these numbers close (+/- 1C) or widely varied? Cathar raised the point in another thread that if someone left the fill/bleed valves in the wrong position, this could severely impede flow and therefore cause a big performance drop. If the three tests were seriously varied (say, test 1 and 2 were 20C over ambient, and test 3 was 12C over ambient) and you averaged them, that would be giving a skewed report of performance (but perhaps making a statement on the relative complexity of installation)

07-27-2004, 05:55 AM	#24
BalefireX Cooling Savant Join Date: Feb 2004 Location: Isle of Man Posts: 269	Lizard - thanks for coming and talking to us (in a civil manner too - maybe paper journalists ARE more respectable than web ones) One thing that stuck out in your explanation was that you did three tests of the Swiftech System, and averaged the results. Were these numbers close (+/- 1C) or widely varied? Cathar raised the point in another thread that if someone left the fill/bleed valves in the wrong position, this could severely impede flow and therefore cause a big performance drop. If the three tests were seriously varied (say, test 1 and 2 were 20C over ambient, and test 3 was 12C over ambient) and you averaged them, that would be giving a skewed report of performance (but perhaps making a statement on the relative complexity of installation) __________________ If not, why not?