Quote:
|
Originally Posted by Cathar
Which brings us back to the original challenge.
Can a waterblock at low-flow rates (~1-1.5LPM), as would be typical of a system coupled with 6-7mm or ¼" ID tubing, and, using with a low-powered quiet pump (<1.5mH2O peak pressure, <10LPM peak flow) provide block-level performance that is within 0.02C/W of a 6+LPM flow rate system, as is typical of a ½" ID system when using a well powered pump (>3.0mH2O peak pressure, >10LPM peak flow rate).
|
JoeC's results show the hydrostream HS5 performing .134c/w at .3gpm while the mcw6000 performed .136c/w at 1.5gpm