Pro/Forums - View Single Post

travanx · 08-11-2004, 02:29 PM

I ordered something similiar to you for my AMD64. I am still doing leak testing though. I got the RBX which comes with the high flo nozzles and barbs when bought in the kit form. I also ordered the D4 pump, 5 1/4 resevoir, maze4 for my 9800pro soon to be x800, 7' tygon tubing, and single heatercore with dd shroud. I ordered the whole entire kit from DD and bought a panaflo m1 fan off of ebay for $11 shipped.

So a couple of things. I only had trouble setting up the RBX. The first time hooking it up I had a little leak because of two things. I didn't have a good enough cut on one of the tubes and I didn't clamp the tube close enough on the barb. So its slowly leaked as I moved the block around on my towel. I fixed it by recutting another tube and clamping the nylon clamps tighter.

Also another little problem. The DD 5 1/4 resevoir is hard to fill. I want to know how to fill this thing easier.

I am running the heatercore with a vantec stealth 120mm fan and the blocks are pretty cold to touch. I can't imagine how much colder it can get with the panaflo fan.

08-11-2004, 02:29 PM	#9
travanx Cooling Neophyte Join Date: Jul 2004 Location: Southern California Posts: 3	I ordered something similiar to you for my AMD64. I am still doing leak testing though. I got the RBX which comes with the high flo nozzles and barbs when bought in the kit form. I also ordered the D4 pump, 5 1/4 resevoir, maze4 for my 9800pro soon to be x800, 7' tygon tubing, and single heatercore with dd shroud. I ordered the whole entire kit from DD and bought a panaflo m1 fan off of ebay for $11 shipped. So a couple of things. I only had trouble setting up the RBX. The first time hooking it up I had a little leak because of two things. I didn't have a good enough cut on one of the tubes and I didn't clamp the tube close enough on the barb. So its slowly leaked as I moved the block around on my towel. I fixed it by recutting another tube and clamping the nylon clamps tighter. Also another little problem. The DD 5 1/4 resevoir is hard to fill. I want to know how to fill this thing easier. I am running the heatercore with a vantec stealth 120mm fan and the blocks are pretty cold to touch. I can't imagine how much colder it can get with the panaflo fan.