Pro/Forums - View Single Post - Hello Again! My rig is done! Comments / Critiques?

gazorp · 08-15-2004, 04:59 PM

*some* People here are rude and inconsiderate. :shrug:

My WC project is finally done and with some great results! After lots of consideration, I decided to skip the chipset waterblock (for now) and use the swiftech NB cooler. I took off the fan cause the damn thing was so loud!

I also decided to go with the mobile athlon XP 2600 and sell my Tbird to a friend. Right now she is chugging along at 2.75Ghz @ 15 X 183Mhz @1.72V. Temps are 35 idle and 38 load. I would really love to push it harder, but i dont think my 420W P/S and XMS 2700LL can keep up! And after all this, I certainly dont have another $300 to invest in those two items! (Maybe my P/S wouldn't be so sad if i didnt have 4 hard drives, 4 fans, 2 pumps, and high voltages draining it!)

My AIW 9700 pro Now overclocks to 400/350 without artifacts. I was kinda hoping for more performance there, but i don't know what else to do... VMODS?

Here is a list of what I installed:
DD TDX
Cyclone Fusion HL
2 x CSP pumps in parallel
Supra heater core w/ custom shroud & two adjustable 92mm fans.
Swiftech NB cooler.
OCZ ramsinks on MOSFETS
P/S sleeving and UV mods

I also gutted a card reader and mounted it in a 3.5" bay instead of the floppy

Thank you to those who replied with nice comments.

08-15-2004, 04:59 PM	#1
gazorp Cooling Neophyte Join Date: Jul 2004 Location: florida Posts: 42	This forum sux0rs some People here are rude and inconsiderate. :shrug: My WC project is finally done and with some great results! After lots of consideration, I decided to skip the chipset waterblock (for now) and use the swiftech NB cooler. I took off the fan cause the damn thing was so loud! I also decided to go with the mobile athlon XP 2600 and sell my Tbird to a friend. Right now she is chugging along at 2.75Ghz @ 15 X 183Mhz @1.72V. Temps are 35 idle and 38 load. I would really love to push it harder, but i dont think my 420W P/S and XMS 2700LL can keep up! And after all this, I certainly dont have another $300 to invest in those two items! (Maybe my P/S wouldn't be so sad if i didnt have 4 hard drives, 4 fans, 2 pumps, and high voltages draining it!) My AIW 9700 pro Now overclocks to 400/350 without artifacts. I was kinda hoping for more performance there, but i don't know what else to do... VMODS? Here is a list of what I installed: DD TDX Cyclone Fusion HL 2 x CSP pumps in parallel Supra heater core w/ custom shroud & two adjustable 92mm fans. Swiftech NB cooler. OCZ ramsinks on MOSFETS P/S sleeving and UV mods I also gutted a card reader and mounted it in a 3.5" bay instead of the floppy Thank you to those who replied with nice comments. Last edited by gazorp; 08-16-2004 at 09:14 PM.