hi there, my first post here, tho ive been viewin this forum for along time, seems its the place to be for these kinda questions!
right to tee off...
i got a Danger Den setup:
maze4 cpu,
maze4 gpu,
z-chipset block(dremmel'ed the Z flow pattern into more of a L)
L30 pump
1/2" clearflex
thermochill 120.2 + 2*12cm fans pull ontop of a 1.5cm shroud and one 12cm pushin.
water temp roughly
28-30 when room temp is
21c
now, i wanna start my world of pelts off with a nice and easy one, so im gonna do a 80w pelt on my maze4gpu.
The problem is, it is not the maze4 gpu 4in1 block that i have, so i need a suitable coldplate for it.
Is maze4 cold plated compatible with both the CPU and GPU maze4? :shrug:
cos i noticed a difference between specs of the maze4cpu/gpu 4in1...the max pelt size is different:cpu=5*5 gpu=4*4,
so if they are completely differnet: shud i go and get some raw copper(3/8"thick) or can i simply mod the maze4/maze3 coldplate.
next question is,
thermal paste. do u guys agree with this: i shud have AS5 on the hot side of the pelt but ASC or AS3 on the cold side.
And im guessin i wont see much of an improvement using an 80w pelt on a voltmodded 9800pro?
Thanks very much for ur time.
