Pro/Forums - View Single Post

dogbait · 09-05-2004, 03:33 PM

Hmmm, well, with an MD-20R in the loop now, (the MD-15R feeding into the MD-20's inlet) I watched as the tube into the MD-15R slowly collapsed, heheh. So I had to wrap some spiral-wrap to reinforce the tube.

The MD-15R still makes a noise with the MD-20R in the loop. When I turn the MD-15R off, the MD-20R's still quiet.

Now surely the MD-20R's intake is restricted to hell with an MD-15R (switched off) in the way?

With respects to the MD-15R's intake, I have 3/8" ID going into 1/2" ID using an adapter between the two hoses. Would it make any difference extending the 1/2" ID intake hose so instead of 6" of 1/2" ID hose I'd have 1'?

-----===MD15R
to:
-----======MD15R

09-05-2004, 03:33 PM	#8
dogbait Cooling Neophyte Join Date: Jun 2003 Location: London, UK Posts: 70	Hmmm, well, with an MD-20R in the loop now, (the MD-15R feeding into the MD-20's inlet) I watched as the tube into the MD-15R slowly collapsed, heheh. So I had to wrap some spiral-wrap to reinforce the tube. The MD-15R still makes a noise with the MD-20R in the loop. When I turn the MD-15R off, the MD-20R's still quiet. Now surely the MD-20R's intake is restricted to hell with an MD-15R (switched off) in the way? With respects to the MD-15R's intake, I have 3/8" ID going into 1/2" ID using an adapter between the two hoses. Would it make any difference extending the 1/2" ID intake hose so instead of 6" of 1/2" ID hose I'd have 1'? -----===MD15R to: -----======MD15R Last edited by dogbait; 09-05-2004 at 03:42 PM.