The problem with all the heatercores that I've seen is that they are all 6.125 inches wide, which is too wide to fit in the front right hand side because the space there is only 6 inches, which means it would be touching the motherboard. If only they made heatercores that were 4.5 inches wide so that there would fit a 120mm perfectly.
The bonneville's width is the same as the 2-342, and I've tried squeezing it into the drive bays. No go because the drive bays are too narrow (5.75 inches because my case has rails inside the bays for the drives to slide on.)
|