Quote:
|
Originally Posted by redleader
A 10*6 heatercore should be overkill for any system, particularly without TECs. Are you getting good airflow through the core? Is the case exchangeing air with the room ok?
|
there is very little blocking the air from entering the core
pictures
here before watercooling
i have since removed the floppy drive bays and that is where the heatercore is located...
1" shroud on both sides of the core.
there is 120mm and 90mm fans for exhast...
my onboard cpu diode states the cpu only goes as high as 35deg and ambient is 26 deg...