Pro/Forums - View Single Post

Senater_Cache · 09-23-2004, 10:17 PM

I really want to see pics !!
I am in a similar situation, I have a D4 (non swifty) with 3/4 OD barbs. My system is 1/2 ID (this was a planned purchase).
I was going to build an adaptor for the high pressure side, while keeping a 3/4 ID tube between my T and my low pressure side of the pump. I d rather stretch the tube over the high pressure barb.

I saw a threaded barb impellor housing over at Laing's site, so that can be an option too.

SenC.

09-23-2004, 10:17 PM	#8
Senater_Cache Cooling Savant Join Date: Jul 2004 Location: F L Posts: 125	I really want to see pics !! I am in a similar situation, I have a D4 (non swifty) with 3/4 OD barbs. My system is 1/2 ID (this was a planned purchase). I was going to build an adaptor for the high pressure side, while keeping a 3/4 ID tube between my T and my low pressure side of the pump. I d rather stretch the tube over the high pressure barb. I saw a threaded barb impellor housing over at Laing's site, so that can be an option too. SenC.