Quote:
|
Originally Posted by JamesAvery22
Are those listed dimensions with or without the mounting bracket and barbs?
If its without Id guess it would perform about the same with quieter fans. Else I dunno.
Im looking at the large 12" x 17" ones but those are single tubes multi-pass ones. Iwaki here I come  |
The ones I have been looking at are the
Derale Series 8000 single pass ones. They're plate and fin, and don't appear to be much different than the swiftec 676, but I haven't seen a 676 up close, only a lot of product spec. pictures. I'm not 100% on the overall size after the mounting stuff, but FWIW, the measurements I've seen on the smallest one is 6" x 11" x 3/4" Almost perfect for three 120mm fans after I figure out how to shroud it properly. Unfortunately they're solid aluminium. Also, they have 3/8" push on barbed inlets and outlets, but from the way it looks, you may be able to cut off the barbs and put on 1/2" barbs, though I don't know how well you'd be able to join new barbs to to the tanks since they're Al.
Also, Derale makes a plate and fin single pass that's 11.25 x 11 x 3/4 which I'm sure would do fine. I don't even know how you could fit anything bigger than that in even a full tower unless you're using an external kit?
I just got a lead from my local NAPA manager about a guy around me (Orange Cty, NY) who may have copper ones, though I don't know if he's going to have copper ones with copper turbulators, or if the turbulators are going to be Al. If they're copper/copper, I'll let you know.