Pro/Forums - View Single Post

morphling1 · 12-30-2001, 08:53 AM

Hi, some time ago I saw #Rotors turbolator WB, so I decided to make something similar, so this was create few minutes ago. It took me 6h with simple vertical drilling machine.

then soldered the top and 14mm (12 ID) Cu pipes for in&outlet

Didn't have time to perfect the looks cos' I wanna see the results.
Here is WB inside my case

And here how I screw it to MB, I use 6mm plexy plate so the MB doesn't bend to much (I use a lot of force)

The results were good, I cut another 2°C from full load temp. of TB 1520@2.11, now its 31°C with water temp of 21°C.

12-30-2001, 08:53 AM	#1
morphling1 Cooling Savant Join Date: Sep 2001 Location: Slovenia Posts: 468	I was bored so I made another WB Hi, some time ago I saw #Rotors turbolator WB, so I decided to make something similar, so this was create few minutes ago. It took me 6h with simple vertical drilling machine. then soldered the top and 14mm (12 ID) Cu pipes for in&outlet Didn't have time to perfect the looks cos' I wanna see the results. Here is WB inside my case And here how I screw it to MB, I use 6mm plexy plate so the MB doesn't bend to much (I use a lot of force) The results were good, I cut another 2°C from full load temp. of TB 1520@2.11, now its 31°C with water temp of 21°C.