Quote:
Originally posted by morphling1
I don't wanna diss your temp results but those are so good that I can hardly believe it. Your cpu pums out 84W of heat at full load and at water temp of 25°C, thermal resistance of this WB is 0.035 K/W!!! if your cpu temp is 28°C. How do you measure temp, if with probe in socket, are you sure it's in contact with cpu. If everything checked, then I must only congraculate for one hell of a WB you made.
|
Thats why I want to send them out to independant reviewers. In case my testing methods are not right.
I have so much flow going through this thing is dosn't have much loss in speed comming out of the block as going in.
I am going to run a hotter stress test on the block today using Toast instead of Folding@Home and that may raise the temps. Even if my temps are off a bit it will still be worth the $20-$25 price compared to Danger Dens Maze 2. I have alot more flow in mine. he only uses 3/8" channels and roughly 1/4" deep. Thats a restriction on its own. Mine has 1/2" wide by 3/8" deep channels. And it has a couple smooth corners to tranfer heat/cold to and from the block.
I will have a pic if the inside later today on my website. After new Years I will send out a few to some independant reviewers.