i have managed to upgrade a humble 80 gig snap 1100 by putting 2 x 200 gig drive in the converting the system to raid
it tried it tested ( but it will wipe both drive in the process)
the raid works well as i have mounted both disks on external hd caddys
i removed one it found the failure then on inserting a new drive and rebooting hey presto raid rebuilds .
alan happy bunnie £2500 snap server for under £600
Quote:
Originally Posted by rami
I have several snap servers (1000,1100,2200,4100 models) and am trying to add 200gig drives to the 4100s.
I am also going to try this with some of the smaller units at some point.
i've tried some of the listed methods to add the drive larger than 130gig but this is all it will recognize. I will continue to play with it.
3 of the 4100's have data on them so i dont want to play with those yet.
version 4 of the os is installed. 1 200gig drive is being used. (seagate) i will purchase more drives when i can get this working.
IDE 48 bit LBA hits: 0
i havnt checked how much newer or older this 4100 is than the other ones i have. could it be that some of them dont support large drives even after the software update? could it be a bios update of some kind is needed?
software version: 4.0.830
hardware version: 2.2.1
bios version 2.4.437
10/25/2004 14:03:14 Command: bios version
PIC Version 1.0, Capibilities 0x00
Failsafe Bios Exists
Failsafe v2.4.437.FS Tue Aug 15 15:23:18 2000
Bios stamp 2.4.437 Tue Aug 15 15:23:15 2000
Plat Bytes 2.2.1
Model Byte 2
Failsafe: -------------------------------L
Flash failsafe sector not locked(30)
|