View Single Post
Unread 08-01-2001, 03:30 AM   #2
GuyBFF
Cooling Savant
 
Join Date: Jun 2001
Location: Winnipeg, MB, CA
Posts: 242
Default

If you can fit a D-Tek Cooler Core (at $42.00 with 1/2" fittings) it will likely cool better than both (it's the same as the Big Momma, but cheaper and 1/2").

Secondly, I'd get the Black Ice, much easier to mount than the standard heater core style, and not much difference really in cooling performance (however only availably in 3/8", you'd need to convert yourself for best performance).

Thirdly the BE Cooling Cube. Effectively made of the same AC core stock as Danger Den, but more tubes / fins (I believe 20 pass). Also the flow has been split amongst two paths to better flow threw the unit, and will accept 1/2" or 3/8" hose (it's actually 7/16", right in between)

Lastly the Danger Den Unit. Not much different than the BE unit, however smaller (could be a plus in a small case). Only suited for 3/8" hose unless you want to do extensive brazing to mount a header like the BE units. Also due to the single flow threw I think 15 passes, the unit kills flow rate in a system.
__________________
A7V8X
Danger Den Maze II
Danner Mag Drive 350
Heater Core Style Rad
Thunderbird 1400 (Soon Barton)
512mb PC2700 CL2
Promise SX4000 Raid 5 w/256mb PC133 Cache
4x40gb Western Digital 7200hdd
Plus More...
GuyBFF is offline   Reply With Quote