Pro/Forums - View Single Post

Blackeagle · 11-04-2004, 05:31 PM

BTW,

I'm going to order this heater core to go with one of Cathars Storm blocks. GDI # 399030 @ PartsAmerica.com this is the same as the 2-192 core from Ford trucks. Has a finned core area that is 2" thick and is 10.75 X 10.25".

Based on Cathar's specs of watts vs rad area, this thing should be able to handle a MD30 type pump and match or beat a MD20. So should do a great job of taking care of my smaller MD20's heat. Which is good as in my case I'm also going to have my Fusion block on the GPU to disapate heat from as well.

Even with great care in routing of lines, I know I won't make 2gpm, let alone 2.5gpm.

11-04-2004, 05:31 PM	#9
Blackeagle Thermophile Join Date: Oct 2002 Location: U.S.A = Michigan Posts: 1,243	BTW, I'm going to order this heater core to go with one of Cathars Storm blocks. GDI # 399030 @ PartsAmerica.com this is the same as the 2-192 core from Ford trucks. Has a finned core area that is 2" thick and is 10.75 X 10.25". Based on Cathar's specs of watts vs rad area, this thing should be able to handle a MD30 type pump and match or beat a MD20. So should do a great job of taking care of my smaller MD20's heat. Which is good as in my case I'm also going to have my Fusion block on the GPU to disapate heat from as well. Even with great care in routing of lines, I know I won't make 2gpm, let alone 2.5gpm.