BLEH..... NAH...... NUH UH
all you have to do is get a hunk of this stuff, problem is....
SilentBob dont have no legs, where'd he got dem' lil monkey legs lyi'n around ehh???
he could just sneek in and grab some after it gets produced, the problem is making this stuff, they found a way to make it in mass quantities
actually ...... it would be better to try and make a chiller that actually worked, see the problem has been along that we've been trying to cool too much water, an inline system with 1/2 id tubing looped back and forth between 6 152 or 172 or 192watt pelts (muahaha) would be quite effective, a sandwich design would be desireable
once I get my inline mATX cube done, I will do some research on building a addon chiller box, I was thinking about putting barbs (in/out) on the bottom in the back of the cube, then on the chiller there would lil recepticles to latch onto the cube, and lock to each other, then hose from the back of the chiller would connect to the cube PC
I was thinking 2 Antec 400watt PSUs powering as many pelts as possible, lets see.... 800watts devided by 172 = 4.6511627906976744186046511627907 or 4.651
or 4.6 or nearly 5 pelts
now, 5 or 4 pelts ... well that sucks
ok 2 800watt PSUs is 8 pelts, now add a lil mATX PSU to power the water pump to pump the hot side through a Leviathin radiator
anyone ever wonder how interesting a few pelts would be on the side of a Monolith rad, ASII 4 of em to the sides, 2 per side, problem is is you gotta get the water to fill up the entire rad, there was a mod for this that envolved taking the bottom and top off the rad and putting 1/2 id or 3/4 id tubing there
I think it was on overclockers.com or something, the one that features the articles on bong cooling ya know
|