Oh, and as long as I'm doing research...I know there are tons of "what's best in this situation" questions and answers, here and on plenty of other websites, and that's what I'm researching, but I figure as long as I'm asking this question...if you want to toss in your comments, by all means, feel free...
System will most likely be built into a CoolerMaster CMSTACKER case. I want the system to look "stock" from the outside; in other words, no radiators sticking out the back or Koolance systems on top, etc. Quietness is a goal, although I'm not going for silence. I'm thinking of mounting two radiators inside the case, one to the 80mm blowhole and one to the 120mm back outlet. (So, here I need advice on what radiators to use and what fans.) I want to put waterblocks on the typical components (CPU, GPU, and chipset), but haven't yet determined how to configure the loop (comments welcome). I'd prefer to use just one pump to keep things simple (make and model of pump?). I understand a reservoir should usually be the last thing before the pump, correct? Finally, what should I use for fluid...I mean, besides the water, of course. What additives should I...umm...add? One thing I know I want to try is something that will make the water glow under UV light. (I only said it had to look stock from the outside, remember!)
|