Here are the specs for the new PIZ series:
(Sorry about the butchering of your original stuff cathar)
Now the 20PI-Z-D has a similar curve to the MD30RZ
with a heat output of a MD 20RZ at (input X output) of 55 x 30 watts!!!
Head=~5.5 meters @ Flow=~9.5-10 LPM
Calculations:
10PI-Z-D, WB delta = 16.5C, Water delta = 118 * 0.041 = 4.84C, Total CPU Temp = 21.34C above ambient
Doing the same math for the
20PI-Z-D with 30 watts output:
We'll get the following flow rates, and also the corresponding radiator C/W, and waterblock C/W at that flow rate:
~10LPM, 0.039, 0.157.
WB delta = 100W * 0.157C/W = 15.7C,
Water delta = 130 * 0.039 = 5.07C,
Total CPU Temp = 20.8C above ambient.
So now we have the following temps above ambient with the following pumps:
(Originally by Cathar at ProCooling - the reds are my additions)
+20.8C => Panworld 20PI-Z-D
+20.8C => 2 x Swiftech MCP600 @ 13.8v (series)
+20.9C => Swiftech MCP600 @ 13.8v
+21.1C => Iwaki MD-20RZ @ 60Hz
+21.1C => 2 x Swiftech MCP600 @ 12.0v (series)
+21.2C => Iwaki MD-20RZ @ 50Hz
+21.34C=> Panworld 10PI-Z-D
+21.4C => Swiftech MCP600 @ 12.0v
+21.4C => 2 x Eheim 1048 (series)
+21.5C => Iwaki MD-15R @ 60Hz
+21.6C => Swiftech MCP650 @ 12.0v
+21.6C => Iwaki MD-30RZ @ 50Hz
+21.7C => Iwaki MD-30RZ @ 60Hz
+21.9C => Eheim 1250
+22.3C => Eheim 1048
+23.3C => Eheim 1046
Comments would be welcome.