When using the Radbox, did it make it difficult to piece the system together after the leak test? I say that because most typically just their leak-test-proof setup directly into the rig, but obviously this is not possible when using a Radbox (correct me if I am wrong here). So, did you have to re-test once you assembled the parts back together?
deception``
__________________
Mobile 2600+ @ 11x240 = 2.65 ghz 1.825 volts
DFI Lanparty NF II Ultra B Hellfire's HKA Rev. 2 6/19 bios with 1/21 romsip
Thermalright SP-97; Vantec 92 MM
Mushkin Black Level II PC 3500 2-2-2-11 5-6-4-3-3-5-6 3.2volts
Sapphire 9800 Pro @ 425/378 VGA Silencer & BGA ramsinks
OCZ Powerstream 520W
Audigy2 ZS
3D Mark 2001SE
|