Pro/Forums - View Single Post - Need a Recommendation on a H2O setup for Dual NV6800's (SLI) and an AMD FX-55

Chew_Toy · 12-12-2004, 08:46 PM

I would get a RBX for the CPU and take each outlet to each graphics card and then to seperate inlet on the res. I would run 1/2 tubing to and from the pump and 3/8 from the cpu block to the GPU block and to the res. From there I would use !/2 again. I would use the Maze4 gpu blocks when they get the new brass tops which will work on the Nvidia cards.

12-12-2004, 08:46 PM	#7
Chew_Toy Cooling Savant Join Date: Apr 2004 Location: Wisconsin Posts: 120	I would get a RBX for the CPU and take each outlet to each graphics card and then to seperate inlet on the res. I would run 1/2 tubing to and from the pump and 3/8 from the cpu block to the GPU block and to the res. From there I would use !/2 again. I would use the Maze4 gpu blocks when they get the new brass tops which will work on the Nvidia cards.