Code:
flow direction >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
~ ---[PUMP1]--[CPU1]--[CPU2]---[DUAL RAD]----|-------|--- ~ (back to pump)
| RES |
~ ---[PUMP2]--[GPU1]--[GPU2]---[DUAL RAD]----|-------|--- ~ (back to pump)
How about that?
If I use two pumps instead of one which would you lot recommend?
About the rad; I'll probably run some tests and switch them between CPU/GPU, see which way performs the best.
New problem - the BIP II turned up this morning;
(ignore floppy)
Width wise its a perfect fit, buuuuttt..... the Black Ice Pro II's height is 277mm and the clearance is 256mm ! DOH!
The rad has to go there, its just the perfect spot esp with room for one of the pumps to go next to it...
Then again there has to be one optical in this machine....
Anyone got any ideas?
Here's two of mine, although both involve cutting the case (*gulp, not the new case!)
1) Cut a hole in the divider between the 5.25" bays and hard drive segment, the size (d x w) of the rad, so it just drops into the hard drive area
2) (now this ones a lot more ambitious
) Cut a hole in the top of the case, so that the optical drive pops up, when a release buttom is pushed.
I think no2 might be a bit ott/hard to do, but boy would that look cool popping up
Like one of those 80's VHS/BetaMax top loading players.
Anyone got any other ideas to solve the rad placing issue? Oh revised pump recommendations now that' we're planning two