Pro/Forums - View Single Post - What do you want to see in a Water Block???

Fixittt · 01-03-2002, 09:20 PM

Hey Jaydee,

here is what I have done to allow more clearance for a temp probe.

Mill a small channel on the under side of the block, that leads uo to the edge of the cpu core.
Take some heatsink coumpond and apply it to a processor core, then slip a waterblock on the moutning bolts. press down firmly to contact the CPU. Pull the block off, and you have an exact location where the CPU touches the block. Take something and scribe a line where one side of the CPU stops, then just mill you a small channel to that line maybe .003 past the line, so U know U have a good reading. and POOF!

Hope it might help

check you email.

01-03-2002, 09:20 PM	#73
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	Hey Jaydee, here is what I have done to allow more clearance for a temp probe. Mill a small channel on the under side of the block, that leads uo to the edge of the cpu core. Take some heatsink coumpond and apply it to a processor core, then slip a waterblock on the moutning bolts. press down firmly to contact the CPU. Pull the block off, and you have an exact location where the CPU touches the block. Take something and scribe a line where one side of the CPU stops, then just mill you a small channel to that line maybe .003 past the line, so U know U have a good reading. and POOF! Hope it might help check you email. __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808