Looking to buy the AquaXtreme 50Z-DC12-T Mag Drive Inline Pump and was wondering which pump setup would be better. I am using 1/2 Tygon tubing and am deciding between one pump with cusomized barb fittings or quick disconnects.
AquaXtreme 50Z-DC12-T Mag Drive Inline Pump w/ Customizable Barbed Fittings
http://www.cooltechnica.com/Merchant...ategory_Code=P
Choose Fitting for the Inlet:
5/8"OD-1/2"ID Black Polypro Barbed Adaptor
1/2"OD-3/8"ID Black Polypro Barbed Adaptor
Choose Fitting for the Discharge:
1/2"OD-3/8"ID Black Polypro Barbed Adaptor
5/8"OD-1/2"ID Black Polypro Barbed Adaptor
Now with 1/2 Tygon tubing I believe I need to purchase this one with the fittings above posted in bold.
AquaXtreme 50Z-DC12-T Mag Drive Inline Pump w/ PnC 1/2"OD Quick-Connects -ETA
http://www.cooltechnica.com/Merchant...ategory_Code=P
Which pump would you considering buying, one with customized barb fittings for inlet and discharge or one with quick disconnects?
__________________
AMD System
CoolerMaster Stacker STC-TO1
|AMD Athlon 64 4400+ X2@2.530MHz|ASUS A8N32-SLI Dekuxe
|2 x 1GB Corsair XMS 3500LL Pro DDR SDRAM Dual Channel Kit @ (1:1) 2-3-2-6
|Thermalright XP-90C
|EVGA 7800GTX KO Edition
|2 x 36.7GB WD Raptors(Raid 0)
|Hitachi 160GB 7200RPM SATA 7K250 Hard Drive
|SB Audigy 2 ZS
|OCZ Powerstream 520W
|Vantec 305 Nexus Fan Controller
|Mitsubishi Diamond Pro 930SB
|Windows XP Pro w/SP2