Quote:
Originally Posted by malbulger
thanks for that,
i have done a full reset on it ( 4 button presses incidently!) and now i get another combination of flashes which does not fit the manual at all .... system light once every second and disk light twice a second ,,, network intermittant (broadcasting presumably) and link light solid.
i have dropped misterbills image onto a second hdd and tried that but it is the same response from the snap
any one seen this before?
|
Ok...let's see that I have this right...
System light=1/s
Link light=solid
network=intermittent
disk=2/s
System light on once a second is a running system as far as everything I've encountered. If the disk light is running twice a second constantly, that could be a bad spot on the disk, but I'm not swearing to it. I'm assuming you tried the Snap assist software and you've tried switching network cables and tried the web interface since you got the new pattern. Oh, that's something else...just on the off chance, if you know or can figure out the IP address, try port scanning it. That'll tell you if it's alive on the network end, not necessarily working, but at least alive. Ok...something you might try would be to connect the Snap directly to your machine using a crossover cable and then trying to hit it with Assist. If you can get Assist to see it and at least do a partial configuration, you can then push one of Snap's SUP files to it to rebuild the operating system. I had a Snap come through here not all that long ago with that problem (there was only enough OS to boot it but that was it...no web interface or anything else).
INT 20h