View Single Post
Unread 12-28-2004, 05:39 PM   #4
Kobuchi
Cooling Savant
 
Join Date: Jan 2003
Location: BC, Canada
Posts: 313
Default

The usual frequencies are 14tpi, 18tpi, 24tpi, and 32tpi.

32tpi is for very hard or thin stuff, 14tpi is for much softer, thicker material - like 1/2" copper. 18tpi would work too. The 14tpi and 18tpi teeth are formed differently than the finer ones, and cut more agressively than just their size would suggest.
Kobuchi is offline   Reply With Quote