View Single Post
Unread 12-30-2004, 09:27 PM   #6
Shootingblanks
Cooling Neophyte
 
Shootingblanks's Avatar
 
Join Date: Jul 2004
Location: Stow, OH
Posts: 26
Default 120mm fan choice and template..

I will eliminate that middle panel. Plan on upgrading my enermax 475w psu to ocz 520 powerstream and will run everything off of this powersupply. I was going to use colder quick disconnects but opted not to. I decided to go with the brass barbs. Just got my email from the guy(dockguy) selling those fans at ebay, and their inventory is totally exhausted. Anyone else know where I can acquire some Sanyo Denki Fans? Will the Evercool Aluminum 120mm Fan be sufficient subsitute if I run them at 7v? Will this following template be a good model to go by for cutting out the fan holes? Also, a cd seems to be very close to 120mm for a template also. Which template would you use with the Evercool 120mm fans?

__________________
AMD System

CoolerMaster Stacker STC-TO1 |AMD Athlon 64 4400+ X2@2.530MHz|ASUS A8N32-SLI Dekuxe|2 x 1GB Corsair XMS 3500LL Pro DDR SDRAM Dual Channel Kit @ (1:1) 2-3-2-6|Thermalright XP-90C|EVGA 7800GTX KO Edition |2 x 36.7GB WD Raptors(Raid 0)|Hitachi 160GB 7200RPM SATA 7K250 Hard Drive|SB Audigy 2 ZS|OCZ Powerstream 520W|Vantec 305 Nexus Fan Controller|Mitsubishi Diamond Pro 930SB|Windows XP Pro w/SP2
Shootingblanks is offline   Reply With Quote