My original idea involved a single core in the front motherboard chamber side (as an intake) and a Laing D4 pump, connected to a White Water and a T line. I would probably have added Swiftech's MCW50 for my 6800GT, but I decided to put all of that back into my Lian Li PC7077 with a dual core instead. The cube isn't bad, but what I dislike is the "cramminess" of the 5.25" and 3.5" drive area. It tends to get rather hot in there, and I just recently bought a 300gb Maxtor hard drive that gets really hot, adding to the overall heat. I'm thinking about making a hard drive block, but I'm not sure where to begin. Guess I should hit the yellow pages and see what sort of metal-working shops are around here.
|