Quote:
|
Originally Posted by XTATDSM
Ok so running the 2 pumps with the Y connector for the outlet of the pumps is ok then, right? and for the inlets I was going to use another Y connector but figured it would be better for the pumps to be sucking water from the res each on its own is better than having the 2 pumps sharing water from a second Y connector, Am I right ?
the order of the parts is just fine guys,I mean I have been running like that for a while and my temps are good as well as my OC (3.2E @ 4.2 Max and 3.9 24/7) (6800 ultra @ 460/1.19 24/7 and 480/1.25 Max)
so try to keep the Y as close as possible to the pumps? same goes for the Res huh? (keeping the res as close as possible to the pumps too is what i mean)
thanks for the input guys
|
Having them each suck from the res is probably a good idea. I thought the Y was your inlet. Chances are having that Y close to the outlet or close to the rad wont make much difference at all. Might as well try both though =)
I think youve already seen the couple of people over at ocforums that actually have them in their hands right now. So Id ask them.