Pro/Forums - View Single Post

Lekta · 01-07-2005, 03:19 PM

thanks for the input nikhsub. Based on what you've said i've revised my setup and this is the final config; all on 3/8ID fittings:

MCW6000
Fusion HL V1.02
MCP350 <-- having to import this from the U.S. as not available over here. But well worth it, especially with the current exchange rate :P
MCRES-525
2x medium speed panflo 120mm's
6.5ft tygon 3/8" ID tubing
Anti-freeze

thankjs for your advice

edit/

and i decided on the 120.1 with 3/8" barbs.

edit2/

based on some sensible advice concerning fan choice and rad width, i've gone with the Black Ice Pro. Thnz nightic

01-07-2005, 03:19 PM	#3
Lekta Cooling Neophyte Join Date: Jan 2005 Location: Brighton. UK Posts: 11	thanks for the input nikhsub. Based on what you've said i've revised my setup and this is the final config; all on 3/8ID fittings: MCW6000 Fusion HL V1.02 MCP350 <-- having to import this from the U.S. as not available over here. But well worth it, especially with the current exchange rate :P MCRES-525 2x medium speed panflo 120mm's 6.5ft tygon 3/8" ID tubing Anti-freeze thankjs for your advice edit/ and i decided on the 120.1 with 3/8" barbs. edit2/ based on some sensible advice concerning fan choice and rad width, i've gone with the Black Ice Pro. Thnz nightic Last edited by Lekta; 01-07-2005 at 04:15 PM.