Pro/Forums - View Single Post

Twill · 01-11-2005, 05:06 PM

<EDIT>

I decided to change the topic of this thread instead of making a new one...dont know why, but the logic was there at some point. Anyhoo...

There is an radiator/autoparts shop near me that will custom make a radiator/heatercore. But I wouldnt know what to ask for as in materials, type, fin structure etc.

I dont know how expensive it would be or if they cut down old HC's or make new ones...but if I were to go ask, and was looking for a rad for low flow fans, what would I be asking for

Twill

--Original pre-edit message------------------

Hey guys,

I'm trying to figure out what rad/heatercore to use with a two low flow 120mm fans.

I'll probably be using the new DDC pump for reference. I havnt chosen blocks yet but will probably include (or build up to) CPU, chipset/GPU, PSU and maybe HDD

The space I have to work with is approx 6inches by 10 7/16ths (but I cut cut up to almost 11 inches)

Budget is more important that performance...I will saccrifice the two degrees for a $60 price difference

any suggestions on a Rad/HC and where to get it in Canada?

Thanks
Twill

01-11-2005, 05:06 PM	#1
Twill Cooling Neophyte Join Date: Sep 2004 Location: la la land Posts: 27	making a custom rad/HC for dual 120 low flow fans? <EDIT> I decided to change the topic of this thread instead of making a new one...dont know why, but the logic was there at some point. Anyhoo... There is an radiator/autoparts shop near me that will custom make a radiator/heatercore. But I wouldnt know what to ask for as in materials, type, fin structure etc. I dont know how expensive it would be or if they cut down old HC's or make new ones...but if I were to go ask, and was looking for a rad for low flow fans, what would I be asking for Twill --Original pre-edit message------------------ Hey guys, I'm trying to figure out what rad/heatercore to use with a two low flow 120mm fans. I'll probably be using the new DDC pump for reference. I havnt chosen blocks yet but will probably include (or build up to) CPU, chipset/GPU, PSU and maybe HDD The space I have to work with is approx 6inches by 10 7/16ths (but I cut cut up to almost 11 inches) Budget is more important that performance...I will saccrifice the two degrees for a $60 price difference any suggestions on a Rad/HC and where to get it in Canada? Thanks Twill Last edited by Twill; 01-13-2005 at 07:01 PM.