Pro/Forums - View Single Post

RoboTech · 01-26-2005, 05:57 PM

The hole for the temp probe is 0.1265" in diameter and runs thru the full length of the 32mm square step.
Temp probe is inserted 32mm (I've tried J-type thermocouple, Platinum RTD, but use thermal diode as it gives me 0.000 resolution.
The centerline of the hole is 0.161" from the top surface of the die.
The exposed die is 14mm^2 x 0.062" thick
Machined from a solid piece of C-110 copper

Hope that helps...

01-26-2005, 05:57 PM	#4
RoboTech Cooling Savant Join Date: Sep 2002 Location: Cincinnati, OH Posts: 229	The hole for the temp probe is 0.1265" in diameter and runs thru the full length of the 32mm square step. Temp probe is inserted 32mm (I've tried J-type thermocouple, Platinum RTD, but use thermal diode as it gives me 0.000 resolution. The centerline of the hole is 0.161" from the top surface of the die. The exposed die is 14mm^2 x 0.062" thick Machined from a solid piece of C-110 copper Hope that helps...