Hey pdf27 thaks for being so harsh, I mean I don't spend days on generating synthectic numbers in a synthetic enviroment just to come on here and smash on people that are asking for some help.
Also, I know why my vapochill project failed A) the vapochill is unable to disapate they amount of thermal load all the components were putting out combied. B) The evaporator head had too small of a contact area on the manifold.
I'm currently "after reading alot of information on this site and many, many, many others!" coming to the conclusing that I'm going to go with 2x TT Big Rads "39.99 comes with a 120fan" TT NB-Cl-W0010 P4 block as for the cost and performance from reviews it's a worth purchase. Danger Den NV-68. And I'm either going to use my big res that I bought from overclockers hideout many years ago or just use a danger den fillport mounted on the top of the case to fill the system.
I'm going to give series a try using 3/8 line and using my existing pump with a rheostat to throttle the flow to document the difference voltate/flow has on the system with this pump. if it is over kill. or adds to much heat to the loop I'll ditch it and buy a smaller unit.
pump---->y-splitter--->Cpu Block--->Radiator---->Yspliter-->pump
--->Gpu block--->Radiator----------------->pump
I'm not going to water cool the northbride as it is absolutly pointless given I can do a 320fsb and get into windows it's the 2.4c temps that are holding the system back from being stable.
I'm going to see if I can do what alot of you have said already, run synthetically and see how the numbers turn out.
|