View Single Post
Unread 02-06-2005, 04:02 AM   #39
MaxxxRacer
Cooling Savant
 
MaxxxRacer's Avatar
 
Join Date: Sep 2004
Location: Los Angeles, Ca
Posts: 310
Default

You can get a hole saw bit from home depot that is slightly smaller than the 120mm hole.. its great for drilling the holes.. the only thing is that you need a larger drill, the bit and the bit mounter... the bit itself is 20 bucks and the mounting system is 35 bucks on top of that. Most power drills wont fit it though. You need one of hte big ones that are generaly powered on a cord. They are for concrete drilling and other stuff...

in other words, if you have a dremel its just cheaper lol.. me I have access to all the equipment so its great for doing the holes though...


If you doing two rads, i suggest one at hte top (the backplate whereh the psu is flips over so that the psu isnt at the top and the fan is) attached to the ceiling, and have the other rad on the floor of the case.. if you leave the feet on the case it will provdie enough airflow so the rad will not be starved for air.
__________________

Excuse me, I believe you have my stapler.
MaxxxRacer is offline   Reply With Quote