Quote:
|
Originally Posted by maxSaleen
Using Peltcalc, I'm getting 15.9 degrees C for a heat load of 50w with a 226w pelt running at 9v and coolant loop with a C/W of .25. Not bad, it would be interesting to see what sort of an OC you could get out of a Pentium M under such conditions.
|
That C/W 0.25 is probably very high for reasonable watercooling of the TEC hotside. The TEC has so much more surface area than a CPU that something like 0.1 or less would be more accurate.
On the other hand, peltcalc doesn't take into account the heat being pulled from other places. (e.g. mobo) So it's temperatures are going to be overly optimistic in that regard.