Pro/Forums - View Single Post - My WB: EK-MCW

Eddy_EK · 03-07-2005, 11:45 AM

The pins at my last picture block are 1,5mm ×1,5mm amd 2mm heigh. As I said before I used Hydor L30 pump.
For now I have estimated the difference in waterflow by look. I could see differences in water flow.
I have head that lumpy channel and R-type WB had different base thicknes. Is that correct and how thick they were?

03-07-2005, 11:45 AM	#26
Eddy_EK Cooling Neophyte Join Date: Mar 2005 Location: Slovenia Posts: 94	The pins at my last picture block are 1,5mm ×1,5mm amd 2mm heigh. As I said before I used Hydor L30 pump. For now I have estimated the difference in waterflow by look. I could see differences in water flow. I have head that lumpy channel and R-type WB had different base thicknes. Is that correct and how thick they were? __________________ EK Water Blocks Last edited by Eddy_EK; 03-07-2005 at 11:59 AM.