Pro/Forums - View Single Post - Water finally set up

Fixittt · 01-08-2002, 08:43 PM

U know, I had that smae problem with my intercooler setup. Had air in the system. I used the fill tube to fill it, and had to turn the case upside down, and to the left and every other which way...... Then I relized that I had plugged the fill tube. This kept it an air tight system, I removed the plug on the fill tube, and within a few hours had all the air out of the system. Is yours sealed? if so, maybe a small pin hole up top somewhere will allow any built up preassure to be released.

Just my 2 cents.

Also, I will get you a now top. No problem. what size hose barbs did U have?

01-08-2002, 08:43 PM	#9
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	U know, I had that smae problem with my intercooler setup. Had air in the system. I used the fill tube to fill it, and had to turn the case upside down, and to the left and every other which way...... Then I relized that I had plugged the fill tube. This kept it an air tight system, I removed the plug on the fill tube, and within a few hours had all the air out of the system. Is yours sealed? if so, maybe a small pin hole up top somewhere will allow any built up preassure to be released. Just my 2 cents. Also, I will get you a now top. No problem. what size hose barbs did U have? __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808