Pro/Forums - View Single Post - My WB: EK-MCW

Eddy_EK · 03-16-2005, 04:10 PM

I have tested WB whoes pictures are on page 1, and I can tell you that WB with pins was almost 2°C worst than the other one.
That was tested on CPU simulator with 100W, and core size 100 square mm. I had 1/2" ID tubes and L30 water pump. The temperatures were tested on 0,03 °C resolution.
And Bill... I dont have that much equipment as you, but I can tall you that my tests are statisticly comparable and repeatable.
I am not newbie as you might think.

03-16-2005, 04:10 PM	#66
Eddy_EK Cooling Neophyte Join Date: Mar 2005 Location: Slovenia Posts: 94	I have tested WB whoes pictures are on page 1, and I can tell you that WB with pins was almost 2°C worst than the other one. That was tested on CPU simulator with 100W, and core size 100 square mm. I had 1/2" ID tubes and L30 water pump. The temperatures were tested on 0,03 °C resolution. And Bill... I dont have that much equipment as you, but I can tall you that my tests are statisticly comparable and repeatable. I am not newbie as you might think. __________________ EK Water Blocks