Pro/Forums - View Single Post - 0.03 MPa pressure equivalent in head (feet)

Zyklon5 · 03-21-2005, 06:41 PM

If i posted this in the wrong section i apologize, as i'm no expert in this field please forgive my inherent mistakes, i would like to know the equivalent in head (feet) for a 0.03 MPa pressure.

In my country good watercooling is almost unavailable and i have to make do with other resources. I've found this pump: Resun ACO 003 220 V/35 W/0,03 MPa/60 l/min. Water flow looks good but since my lack of insight into this field i can't really figure out that pressure spec.

http://www.unistar.cz/profi/profi_pumpy.html
http://www.unistar.cz/profi/ACO-004A.html

Any help or adive will be greatly appreciated.
Thank you.

03-21-2005, 06:41 PM	#1
Zyklon5 Cooling Neophyte Join Date: Feb 2003 Location: - Posts: 2	0.03 MPa pressure equivalent in head (feet) If i posted this in the wrong section i apologize, as i'm no expert in this field please forgive my inherent mistakes, i would like to know the equivalent in head (feet) for a 0.03 MPa pressure. In my country good watercooling is almost unavailable and i have to make do with other resources. I've found this pump: Resun ACO 003 220 V/35 W/0,03 MPa/60 l/min. Water flow looks good but since my lack of insight into this field i can't really figure out that pressure spec. http://www.unistar.cz/profi/profi_pumpy.html http://www.unistar.cz/profi/ACO-004A.html Any help or adive will be greatly appreciated. Thank you. __________________ -