Pro/Forums - View Single Post

Twill · 03-23-2005, 09:59 PM

Hi there all,

I'm trying to figure out what transmission oil cooler would work best for two 120mm Nexus fans (low flow)

The size dimensions are very strict tho, I have at most 130mm by 270mm including barbs and all. And I am hoping for as close to 1 inch thick or less because of height restrictions.

The equipment used will be
DDC
Swiftech MCW6000
eventually a GPU block
Fill and bleed

So, within those specs, any ideas? the BIP II is close to perfect, but too expensive, thus the tranny cooler.

Thanks for any help possible

Twill

03-23-2005, 09:59 PM	#1
Twill Cooling Neophyte Join Date: Sep 2004 Location: la la land Posts: 27	Tranny cooler advice needed Hi there all, I'm trying to figure out what transmission oil cooler would work best for two 120mm Nexus fans (low flow) The size dimensions are very strict tho, I have at most 130mm by 270mm including barbs and all. And I am hoping for as close to 1 inch thick or less because of height restrictions. The equipment used will be DDC Swiftech MCW6000 eventually a GPU block Fill and bleed So, within those specs, any ideas? the BIP II is close to perfect, but too expensive, thus the tranny cooler. Thanks for any help possible Twill