I should have been more clear in my diagram that I was pondering a block with the transducer inside of it, not on the outside. As for the electrostatic idea, that is interesting also, but it would be hard, if not impossible to implement it in a water cooled environment since it would be near impossible to find a cooling solution with a high enough dielectric constant while maintaining the positive cooling attributes associated with water. In both situations, the question of impact upon the electronic functionality of the CPU while either being bombarded with piezoelectric induced energy, or high voltage fields in the case of the electrostatic approach, remains to be assessed.
Hoot
__________________
DFI LP UT NF4 Ultra-D 7.04-3 Bios
A64 3700+ San Diego 11x257 (2827 Mhz) @ 1.57Vcore
2x1Gb Crucial Ballistix 7:6 (300 Mhz) 3-3-3-8-1T @ 2.77V
Connect 3D x850xt 620/625
2x WD 36GB Raptors in Raid0
DIY Jet Impingement WB on CPU / Pipecap WB on GPU
Shrouded Camaro Heater Core / Swiftech MCP655 Pump
Antec P-160 Tower / Seasonic S12 600W PSU
MAXIM 6658 Thermal Diode Reader
Moderator at OCForums
|