Quote:
|
Originally Posted by jaydee116
I bought some compression springs said to be rated at 16lbs per inch. A little stiff maybe but I think I can work with that until I decide which stock kit to order. Probably be the Swiftech as I want a MCW6000 anyway. Just as well buy the block and hardware at the same time.
|
Using 832 (or632) bolts, 15 turns should equal a 30lb total load at the 4 springs. Ideally, you don't want to compress the spring more than 80% of its total available distance as the rate starts to ramp up in the last 20% ( from what I read, but I imagine it will vary somewhat depending on the spring)