Quote:
|
Originally Posted by unregistered
xylene
Home Depot
|
We got that in 5gallon cans at work.
Mix it with paint for painting sructual steel. I use an old tooth brush to clean the cpu with paint thinner. xylene might eat the tooth brush. Will give it a shot.
I got 3 probes calibrated. Got 2 in T's with sealant drying and the 3rd under the CPU. Once the sealant dries I can refill the system. Pondering installing the Hydrothruster500 and removing the VIA2600.... Will do a leak test in the Hydrothruster as I got a few cracks in the impeller housing. It is it stops spinning when the water hits 30C, I can only assume the impellor shaft assembly parts expand to much at that temp and bind up.. That's why I havn't used it much.
Right now with the gate valve all the way open I get 1.8GPM with the Project X block. What I think I will do is swap that block out and install my Maze 4 block for a better idea what the VIA2600 is capable of. I know the Maze 4 to not be to restrictive. Just aswell as I have to start all over again anyway (first of many I expect....).