Pro/Forums - View Single Post

starbuck3733t · 04-01-2005, 02:39 PM

Well... I could. but its a bit messy. And I know you (madhacker) are an electronics type too - where do they attach heatsinks on FETs? To the tab, as that's the hottest part.

But it is another thing to consider. especially since I do have some nice 1/4" OD copper tubing left over from a ice dispenser install. I could make some blocks out of copper 1/2"x1/2" barstock and drill holes through the center.

*HRM*

edit: nice big image of how the IC7 is layed out on the front.
http://www.ixbt.com/mainboard/images...c7-g-board.jpg

04-01-2005, 02:39 PM	#14
starbuck3733t Cooling Savant Join Date: Nov 2002 Location: State College, PA Posts: 338	Well... I could. but its a bit messy. And I know you (madhacker) are an electronics type too - where do they attach heatsinks on FETs? To the tab, as that's the hottest part. But it is another thing to consider. especially since I do have some nice 1/4" OD copper tubing left over from a ice dispenser install. I could make some blocks out of copper 1/2"x1/2" barstock and drill holes through the center. HRM edit: nice big image of how the IC7 is layed out on the front. http://www.ixbt.com/mainboard/images...c7-g-board.jpg __________________ Goliath: 3.4E@3.91/Abit IC7, Maze4 (temporarily) + custom splitter to crazy 4-way watercooling parallel loop: X800XT @ 520/1280 + AC Twinplex, AC Twinplex Northbridge, Silenstar Dual HDD Cooler, Eheim1250, '85 econoline van HC + 2x120, 1x120 exhaust - polished aluminum frame panaflo L1As, 2x18GB 10K RPM U160 SCSI, 4GB PC4000. I wanna be BladeRunner when I grow up! Project Goliath - nearing completion.